一种新的磁共振图像处理流水线的设计与实现

磁共振图像的重建、后处理及可视化是磁共振成像（MRI）系统的重要组成部分.本文开发了一个新的用于磁共振图像重建、后处理及可视化的开源框架YAP（Yet Another Pipeline），利用此框架可以方便地构建图像处理流水线.与现有的一些其他开源框架相比，本文开发的框架具有如下特点：（1）采用基于接口的设计，可使用基于接口的插件对流水线的功能进行扩展；（2）允许用户使用编写脚本的方式构建图像处理流水线，编辑与修改流水线都很方便；（3）支持带有分支结构的流水线，便于流水线的构建与调试.目前，该框架已经在商用系统中获得了应用.     

Processing polyamides with superheated water

Superheated water (shH₂O) is investigated as a process aid in conventional aliphatic polyamide (PA) systems. The polymers investigated include PA 6 (PA6), PA 6,6 (PA66), PA 6,12 (PA612), and PA 12 (PA12). It is shown that the PA melting and crystallization temperatures are significantly reduced when exposed to shH₂O. For example, the melting temperature of PA6 is depressed from 206 to 153 °C in the presence of shH₂O. A relationship between amide group density and thermal transition temperature reduction is observed. Processing these materials in shH₂O has led to a variety of materials ranging from low‐density foams to higher density locally anisotropic foamed morphologies. In situ observations of PAs melting in the presence of shH₂O are performed using a specially designed reactor. Results from these experiments are used to estimate the diffusion coefficient of shH₂O in PA6. Finally, low‐temperature extrusion is performed with PA6 and shH₂O at temperatures as low as 180 °C and mixture viscosity is estimated. A 20‐fold depression in the melt viscosity of PA6 is observed at 240 °C with shH₂O. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 803–813     

Morphological reorganization and mechanical enhancement in multilayered polyethylene/polypropylene films by layer multiplication or mild annealing

Shortly after processing, Polyethylene/Polypropylene (PE/PP) multilayer films demonstrate an increase in tensile modulus and other mechanical properties when the individual layer thickness is below 0.5 µm. Subsequent annealing at 60 °C for 16 h brings the properties of all other samples to similar values. WAXD characterization of the layered films identified a prevalence of mesophase in the thicker PP layers. In samples with increased layer numerosity or subjected to annealing, WAXD detected its conversion to α crystalline phase that correlates with improved mechanical properties. SSNMR and DSC detailed the defective nature of α iPP crystallites. Comonomers, detected by NMR in the commercial polymers used for the films, are the source of “tunable disorder” that dictates the formation of the PP mesophase and the low temperature of conversion to the mechanically stronger defective α phase. Soft intrafilm layer interfaces instead enable nucleation and localized polymer chain rearrangement even without annealing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 520–531     

Implementation of a nonlinear filter for online nuclear counting

Nuclear counting is a challenging task for nuclear instrumentation because of the stochastic nature of radioactivity. Event counting has to be processed and filtered to determine a stable count rate value and perform variation monitoring of the measured event. An innovative approach for nuclear counting is presented in this study, improving response time and maintaining count rate stability. Some nonlinear filters providing a local maximum likelihood estimation of the signal have been recently developed, which have been tested and compared with conventional linear filters. A nonlinear filter thus developed shows significant performance in terms of response time and measurement precision. The filter also presents the specificity of easy embedment into digital signal processor (DSP) electronics based on field-programmable gate arrays (FPGA) or microcontrollers, compatible with real-time requirements. © 2001 Elsevier Science. All rights reserved.     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的"扩展邻域轮廓",建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.     

Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin

It was studied the effect of ultrasonic processing (22 kHz) of the aqueous suspension of metakaolin, sodium hydroxide and alumina with a molar ratio 2Al₂Si₂O₇:12NaOH:2Al₂O₃ on the low-modulus zeolite synthesis processes. To investigate the XRD, SEM, IR, EDS had been used. It was shown that after ultrasonic processing, sodium aluminates are formed, what leads to a change in process of further synthesis. It was found that without ultrasonic processing on the stage of thermal treatment at 650 °C, SOD zeolite (|Na₆|[Al₆Si₆O₂₄]) and sodium aluminosilicate (Na₆Al₄Si₄O₁₇) are synthesized. In the sample after ultrasound during thermal treatment, only sodium aluminosilicates of cubic syngony (Na₆Al₄Si₄O₁₇ and Na₈Al₄Si₄O₁₈) are formed. It was demonstrated that sodium aluminosilicates are precursors for the formation of LTA zeolite (|Na₁₂|[Al₁₂Si₁₂O₄₈]). As a result zeolitization of sodium aluminosilicates after the hydrothermal crystallization in alkaline solution, the sonicated sample contained 97 wt% LTA. Without ultrasonic processing, the product of synthesis contained 50 wt% SOD and 40 wt% LTA.     

Evaluation of yarn defects by image processing technique

Yarn defect evaluation, since they can drastically deteriorate the quality of the product, is one of the most important problems in textile industry. In this work, the yarn defects are evaluated by image processing technique. Initially, images were taken by scanner, later the obtained images were modified by using several filters. Then, the yarn defects were identified base on their geometric shape and surface area. As the results show, image processing methods is excellently reliable in evaluating number and type of yarn defects.     

浅谈黄原胶及其在农药制剂加工中的应用

黄原胶是极具发展潜力的生物多糖,独特的分子结构使其具有良好的增稠、乳化和稳定作用,已被广泛应用于日用化工、石油开采、纺织印染、食品、医药、涂料、农药等众多工业领域,拥有广阔的市场前景。本文对黄原胶的结构、特性、生产工艺以及主要应用领域等进行了简单综述,总结了黄原胶在农药制剂加工中的应用现状,指出黄原胶优越的流变特性对悬浮剂、水乳剂、悬乳剂等农药制剂悬浮稳定性的提高具有重大意义,最后展望了黄原胶未来的发展前景。     

Internal inspection of semi-transparent objects by digital holographic micro-tomography

The combined use of digital holographic microscopy and computer tomography, here named digital holographic micro-tomography, is used to examine the interior of transparent channels. The proposed method is used to identify internal obstacles inside of transparent troughs having slightly different refractive index. The method is based in the acquisition of a set of digital holograms of the specimen whereas it is axially rotated from 0° to 180°. The phase differences retrieved from the obtained holograms are the inputs to a computerised axial tomography procedure. The technique has been numerically modelled in order to find the optimal tomographic conditions and also to realise the minimum difference of refractive index the method could detect. The obtained results show the feasibility of the proposed method for the non-destructive evaluation of transparent micro-objects.